2006 Lotus Exige
$42,000

2006 Lotus Exige

$42,000

2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige
2006 Lotus Exige 2006 Lotus Exige

Vehicle Details

Mileage
30,200
Body Style
Coupe
Exterior Color
Orange
Interior Color
Black
VIN
SCCPC111X6HL82520
Transmission
Manual
Engine
4
Drivetrain
RWD
Private Seller
860-986-9199
Tolland, CT 06084

*Required

Seller's Notes

2006 Chrome Orange Exige Currently located in Connecticut 30xxx miles (May increase a little) Options: Star shield,Traction Control,Touring Pack Upgrades: BOE Rev 300 Supercharger kit, Rev 300 tune, PPE Header and decat, BOE ST exhaust, BOE Clam hinge 2.0, BOE Catch can, AEM Wide band O2 sensor, Custom upholstered seats + door panels, Dunlop Direzza Z1 Star Specs in front Dunlop DZ102's in the back, High temp racing brake fluid Dietsch Werks' custom blend transmission fluid Polyurethane bushings for upper rear control arm Sector 111 DS Brace, Micro Mirror Convex mirrors on driver and passenger side, Light weight battery New oil lines and connectors, Slotted front rotors, Shifter reinforcer, Blacked out emblems: front clam, steering wheel, and all 4 wheel center caps, DRLs disabled, JVC high quality speakers front and rear, Alpine Bluetooth stereo, Sector 111 Pedals, Sector 111 Bootie, 5000K HIDs, Sector 111 Rubbertite floor mats, 3 keys and 2 fob Fixes: Front headlight connectors re-crimped (connections were loose), Rear tail light replaced (had burnt out LEDs) Readjusted windows to seal correctly, Thermostat replaced Replaced aging coolant expansion tank Plasti-dipped the airbag ring black. Flaws: There's a couple small nicks in the star shield on the front clam that were inherited from the first owner. There's a small bit of curb rash on the back right wheel also inherited from the first owner. Front driver headlight and turn signal have the "bungee cord mod" due to broken plastic mounts. When i was installing the PPE header i didn't realize i needed a spacer on the new studs. I ended up stripping some of the threads in the head. I installed a couple heli-coils and everything bolted up perfectly. No exhaust leaks. The roof has a small crack in it which i just noticed today while taking pictures. Bolsters on driver seat are showing some wear.